Sony XL-5200U Projector Lamp with Module

If I order this lamp, but it turns out something else is wrong with my TV, will I still be able to return it? Asked by John B. On Apr 27, 2023

Yes, you can exchange your lamp for any reason within 180 days of receiving it , but if you require a refund, then you have to return the lamp in 30 days.

What is the voltage for this lamp? Asked by Alvita V. On Nov 03, 2022

The voltage of the bulb for the Sony KDS-55A2000 RPTV projector is 120 volts.

Are these new bulbs in the modules? Asked by John S. On Jun 29, 2023

Yes, there are new bulbs that come with our MyProjectorLamps branded modules. Our bulbs are exactly the same as the bulb manufacturer's bulbs.

Is this the correct bulb for my Sony 60-inch SXRD Projection TV Model KDS-60A2000? Asked by Dolores O. On Jul 18, 2023

Yes, this is the correct bulb, MyProjectorLamps SKU#: MPLL10374, for your Projection TV model KDS-6A2000. This is the bulb for the Sony KDS-60A2000 projector.

How do you install this lamp and module? Asked by Ronald D. On Aug 16, 2023

There are a few steps to install a lamp and module, which are similar for every projector. First make sure the projector is unplugged and sitting on a flat surface. Then loosen the screw that holds the projector lamp module cover in place and remove the panel. Next unplug the old projector lamp and remove it from the projector. After which, you plug the new projector lamp securely in place. Lastly, attach the panel back onto the projector and tighten the screw. If you need more information, here is a link to our installation video: https://www.myprojectorlamps.com/lamp-install.html.

Does this module match my Bravia SXRD projection tv? Asked by Terry B. On Jan 17, 2023

Your projection TV, the Sony Bravia SXRD needs the XL-5100 lamp, which has the Internal SKU#: MPLL11706.

What is the difference in the 4 projector lamps/modules for the Sony XL-5200 Projector? Asked by Ward S. On Feb 14, 2023

There is no difference between the 4 projector lamps for the Sony XL-5200 projector. All the bulbs are made by PHILIPS and are of the same quality. Either bulb will fit into your projector, except the Mitsubishi XL-5200, which may be different, since it's for a Mitsubishi projector.

If I order this lamp, will it be the lamp and housing complete? Asked by Jonny S. On Aug 04, 2017

This lamp comes complete with lamp and housing. It is a plug and play lamp, you remove the old lamp and slide this new lamp right into place. A ver easy installation and should take less than 5 minutes.

I need to know If I’m ordering the correct part KDS-60A2020 for my Sony projector. Asked by Terry B. On Aug 06, 2022

Yes, the Sony XL-5200 replacement lamp will fit into your Sony KDS-60A2020 RPTV. You are on the correct product page and our MyProjectorLamps internal SKU is MPLL10374.

Is this lamp easy to replace? Asked by Christopher K. On Aug 30, 2024

Yes, all of our lamps are easy to replace. Just follow these steps to replace the module and bulb. First, make sure the projector is unplugged and sitting on a flat surface. Then loosen the screw holding the projector lamp module cover in place and remove the panel. Next, unplug the old projector lamp and remove it from the projector. After which, you need to plug the new projector lamp securely into place. Lastly, attach the panel back onto the projector and tighten the screw. If you just want to replace the bulb or the bare bulb, follow these steps. First, follow steps 1-2 above. Then remove the retaining clip holding the old lamp in place. Next, unscrew the wires connected to the bare projector bulb. After which, replace the old lamp with the brand new replacement bulb and fasten the clip. Lastly, tighten the screws.

Yes, all of our lamps are easy to replace. Just follow these steps to replace the module and bulb. First, make sure the projector is unplugged and sitting on a flat surface. Then loosen the screw holding the projector lamp module cover in place and remove the panel. Next, unplug the old projector lamp and remove it from the projector. After which, you need to plug the new projector lamp securely into place. Lastly, attach the panel back onto the projector and tighten the screw. If you just want to replace the bulb or the bare bulb, follow these steps. First, follow steps 1-2 above. Then remove the retaining clip holding the old lamp in place. Next, unscrew the wires connected to the bare projector bulb. After which, replace the old lamp with the brand new replacement bulb and fasten the clip. Lastly, tighten the screws.